Product description

• Hex Head Self Drilling Screws – General metal fastening, hex head for positive drive connection. Coarse Thread – Class 3 coating complies with AS3566.2-2002

• Hex Head Self Drilling Screw – UV and weather resistant EPDM non-conductive washer. Coarse Thread – Class 3 coating complies with AS3566.2-2002

• Pan Head (Zinc Plated) Self Tapping Screw – Commonly used in sheet metal fabrication. Pre-drilled or pre-punched holes required; screws cut their own thread. #2 PH

• Metal Drive Anchor – Zinc plated, mushroom head. Light duty, all metal hammer drive expansion anchor that provides a tamper proof fixing into concrete and solid masonry.

• Dome Head Rivet – Aluminium (AS) plain and painted; General purpose Dome Head Aluminium rivet with Steel mandrel for most common roofing, cladding, plumbing and sheet-metal applications.

• Double Ended Panel Drill High Speed Steel (HSS) material with Titanium Nitride coating reduces heat and increases lubricity for extended drill life.

Product description

• HBS Pegasar 500 Accu Stud Weld Gun is a battery-powered, mobile device that’s robust and simple to use when stud welding in the workshop or at a job site. It’s also safe and features quick access buttons for fast setup and pre-stored parameters. Fully charged in about 2.5 hours, the Pegasar 500 provides consistent welding energy.

• SureShot II Accessories – we also stock spare parts for the SureShot II CD Weld Gun (previously supplied by Baron Insulation)

• Blue Plastic Strapping – 12mm wide reinforced blue plastic strapping in dispenser containing 1000m $25.63 /roll; plus, Plastic buckles – supplied in packets of 1000.

• Steel Strapping – Galvanized – includes:

• • Steel Banding (two sizes) – 12.7mm x 0.4mm Galvanized Strapping 13-15kg Rolls (approx. 300m) and 19mm x 0.4mm Galvanized Strapping 13-15kg Rolls (approx. 200m)

• • Galvanised ZR Seals (two sizes) – ZR seal for 12.7mm strapping (1000 seals/carton) and ZR seal for 19mm strapping (1000 seals/carton)

• • Steel Banding Tool – Z R Tensioner to be used with ZR Seals

Product description

Our range of pins and clips includes:

• Cup Head Weld Pins – Quick and easy fastening procedure: simply push the cupped head pin onto the chuck of the welding gun and push it through the insulation to weld; Suitable for thermal, fire and acoustic insulation with and without aluminium foil – Fyrewrap®, Glasswool, Polyester, Rockwool; Back side of cupped head electrically insulated; 2.66mm diameter.

• CD Weld Pins – are 2.67mm diameter with a 5mm base and are used with a capacitor discharge pin welder, also available from Baron.

• Self-Adhesive Base Pins – have a 50 x 50mm galvanised metal base. For best results, apply to a dry, clean non-porous metal, thermally cured painted surface only – free from oil, grease, dust etc. Clean with methylated spirits. Service temperature is from -30ºC to 80ºC.

• Perforated Metal Base Pins – have a 50 x 50mm perforated galvanised metal base and can be used with a suitable anchor adhesive such as Liquid Nail or Max Bond.

• Type K Speed Clips – a 32 x 25mm galvanised metal clip.

• Type M Speed Clips – a 38mm diameter galvanised metal clip.

• Thumb Clips – a 38mm diameter black nylon clip. Select the pin length or cut down to below the insulation surface to give a firm grip.