Archives: Applications

3M 615+ Ductwrap

Fire rated duct wrap materials are a lightweight alternative to fire spray used to provide 1- or 2-hour fire rated protection for ductwork in commercial buildings.

Element Lining Board

Vacuum-formed Superwool Boards are finished with smooth edges for squareness and close tolerances.

Superwool Plus Blanket

Superwool Plus Blanket is a durable, easy to handle insulation material made from long superwool fibres. With excellent thermal stability and fire protection qualities, the product retains its original soft fibrous structure up to a continuous operating temperature of 1000ºC.

Baron FireBLOCK

Baron FireBLOCK is manufactured from a robust, resilient Rockwool insulation material encapsulated in a soft, 50-micron malleable aluminium foil with joins in the foil; to seal, use a self-adhesive aluminium foil tape.

FyreWrap Access Panels

FyreWrap® Access Panels are a patented system designed to maintain the fire rating on ducts protected by FyreWrap, while allowing access for the purpose of inspection, service, repair or replacement of internal equipment.

FyreWrap

Fire rated duct wrap materials are a lightweight alternative to fire spray used to provide 1 or 2 hour fire rated protection for ductwork in commercial buildings. Common uses include smoke exhaust ducts, kitchen exhaust ducts, supply air ducts for zone pressurisation systems and chemical fume ducts. Products are fire tested in accordance with AS 1530.4.

Foil Faced Baron Rockwool Pipe

Foil Faced Rockwool Pipe Section is continuous through the wall/floor and extends both sides. Tested by the Thermal Insulation Contractors Association Australia and accredited by BRANZ (Report FP10422) in accordance with AS1530.4 –2014, AS4072 and the NCC building code requirements for FRL -/ 120 / 120 in both horizontal and vertical penetrations.

Aluminium Foil (50um)

Aluminium foil – a “dead soft” 50 micron plain aluminium foil often used instead of a building foil for higher temperature applications.

FyreFlex

FyreFlex sealant is a water based, low VOC and environmentally friendly fire rated, intumescent based sealant.

Flex Connection

Vinyl is a commonly used fabric for all duct installations due to its high tear strength and high abrasion resistance.

Polywool 24kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 32kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 48kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 20kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Glasswool 32kg

A medium density versatile glasswool insulation providing superior sound absorption properties making it a common choice for internal lining air-conditioning ductwork. The high binder content gives it good rigidity and thickness stability.

it is available in various R-values to meet Building Code requirements. The maximum service temperature for the faced surface is 70 degrees Celsius.

Supplied in roll or sheet form to allow for greater design flexibility in HVAC and commercial building applications.

Glasswool 24kg

Glasswool Insulation has the high resiliency of a board, while retaining enough flexibility to be used in roll form.

Plain Foil Facing (LD, MD and HD)

Our range of light, medium and heavy-duty facing foils are double-sided aluminium and feature different levels of product strength reflected in their duty classification.

Glasswool Ductwrap

Glasswool Ductwrap is a lightweight, flexible insulation blanket designed for external lagging of sheet metal ductwork as well as low to medium temperature industrial equipment and appliances.

Glasswool 48kg

Featuring high compressive strength and clean, accurate fabrication, this high density Glasswool material has excellent thermal and acoustic properties.

Quadzero™ Loaded Vinyl

Quadzero™ Loaded Vinyl Barrier is a high-performance, foil faced, mass-loaded vinyl noise barrier, offering superior acoustic transmission loss and low spread of flame surface covering. It is dense, thin, highly flexible, tear-resistant and strong, specifically designed to meet market requirements for reducing noise

Foil Faced Baron Rockwool Pipe

Foil Faced Rockwool Pipe Section is continuous through the wall/floor and extends both sides. Tested by the Thermal Insulation Contractors Association Australia and accredited by BRANZ (Report FP10422) in accordance with AS1530.4 –2014, AS4072 and the NCC building code requirements for FRL -/ 120 / 120 in both horizontal and vertical penetrations.

External Clad

The External Clad system is a zero permeability, absolute vapour barrier for insulation cladding and jacketing applications, designed for insulation protection.

Black Matt Fibreglass (BMF) Tissue

Black Matt Fibreglass (BMF) Tissue – an affordable acoustic option in applications where the product may be partially viable (ie. behind perforated metal or timber slats). It is a light duty tissue made from bonded continuous glass fibres It is not suitable for mechanical cleaning or where a vapor barrier is required.

Durasorb Black

Durasorb is a black facing material made from 100% non-woven polyester, which is spunbonded with an embossed pattern. When applied in an acoustic facing to Glasswool and Rockwool products, Durasorb provides aesthetic appeal and prevents fibre erosion. Often used as an internal lining in ductwork, behind perforated metal in acoustic silences and behind acoustic wall and ceiling panels.

Melinex/Mylar Facing

Mylar or Melinex (polyester film) 23 micron is a lightweight clear film which provides an absolute separation between insulation and airways to minimise fibre erosion whilst offering minimum acoustic resistance.

AFT (Aluminium Foil Trilaminate)

AFT – Aluminium Foil Trilaminate (Vapastop 883) is a lightweight, fully sealed continuous acoustic membrane (CAM) suitable as an internal liner for ductwork. It is ideal for applications where a vapor barrier is required combined with superior indoor air quality performance by minimising the risk of fibres entering the duct’s air stream, whilst also maintaining an excellent acoustic (NRC) performance. AFT can sustain mechanical cleaning.

Perforated Heavy Duty (HDP) Foil Facing

A reflective foil insulation, our Perforated Heavy Duty (HDP) provides superior NRC acoustic performance values where noise minimisation is essential and where an internal vapour barrier is not required.

Tombo Rock Pipe

Tombo Rock (Rockwool) SPI (Sectional Pipe Insulation) comprises inorganic spun fibres made from natural rocks and minerals bonded by organic binder.

DuctGuard

DuctGuard is a premium protection/masking film with high-level of adhesion.

Mechanical Fixings

For metal fastening choose from these popular metal fixings: Hex Head Self Drilling Screws, Pan Head (Zinc Plated) Self Tapping Screw, Drive Anchor, Dome Head Rivet, and Double Ended Panel Drill High Speed Steel (HSS) material with Titanium Nitride coating.

Weld Pin Guns and Strapping

Choose from a selection of reliable products including: HBS Pegasar 500 Accu Stud Weld Gun, SureShot II Accessories, Blue Plastic Strapping and galvanised Steel Strapping.

Fixing Pins and Clips

Baron stocks a variety of HVAC Insulation pins and clips to use when installing both fibreglass duct board insulation and fibreglass duct wrap.

Flange Tape

PE Foam Tape (Self-Wound Flange Tape) has a uniform closed cell structure with a smooth surface that gives an excellent seal against water and vapour transmission when compressed 10 – 30% of its original thickness.

External Clad Tape

Use this 3-ply adhesive-backed tape with the External Clad system. Offers zero permeability.

Durasorb Tape

Baron Durasorb Tape is a black self-adhesive tape with release paper that matches Baron Durasorb facing insulation products, which is spunbonded 100% non-woven polyester with an embossed pattern.

Plain Foil Tape

Use plain foil tape to seal overlaps and joins in insulation material. Baron Insulation Aluminium Foil tapes have a pressure sensitive adhesive, so, they must be applied using pressure. The more you pressure apply, the more surface contact is achieved, and the better the bond.

Reinforced Foil Tape

Reinforced Aluminium Foil Tape is a flexible aluminium foil, laminated with a polyethylene mesh and coated with a high strength, solvent-based aggressive acrylic adhesive and protected by an easy peel release liner.

Tombo Rock Roll and Board

Rockwool is non-combustible material, suitable for thermal insulation, fire protection, and sound absorption/noise reduction.

Tombo Rockwool is an economical insulation material which can be used in applications where high temperatures are involved. The Tombo Rockwool range has a maximum service temperature of 650 degrees Celsius and all blanket material is supplied with a foil facing which enhances flexibility, handling characteristics and strength.

Scrim faced Tombo Rockwool is also available on request.

SoundLag 4525C and SoundLag 8025C

Soundlag 4525C is a combination of 25mm convoluted decoupling foam together with a 5kg/m² loaded vinyl barrier material.

Soundlag 8025C is similar to 4525C however has a combination of 25mm convoluted decoupling foam with an 8kg/m² loaded vinyl barrier material.

Soundlag 4525C and 8025C control unwanted sound from hydraulic and waste pipes and other fittings or equipment needing acoustic treatment (fans, air conditioners, pool pumps, motors, etc.) These products are suitable up to 80ºC. Cut to size pieces are sized to include the longitudinal overlap needed for acoustic performance on PVC waste pipes. Strapping and/or foil taping is required to ensure overlaps are maintained. Overlaps can also be achieved by using strips of Wavebar Quadzero at all joins. Refer to the Baron Soundlag brochure for correct installation procedure and applications that meet acoustic reduction requirements of the National Construction Code (formerly BCA).

3M 615+ Ductwrap

Fire rated duct wrap materials are a lightweight alternative to fire spray used to provide 1- or 2-hour fire rated protection for ductwork in commercial buildings.

Flex Connection

Vinyl is a commonly used fabric for all duct installations due to its high tear strength and high abrasion resistance.

Polywool 24kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 32kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 48kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Polywool 20kg

Polywool Insulation is a thermally bonded 100% polyester blanket with good thermal control and acoustic absorption properties.

Glasswool 32kg

A medium density versatile glasswool insulation providing superior sound absorption properties making it a common choice for internal lining air-conditioning ductwork. The high binder content gives it good rigidity and thickness stability.

it is available in various R-values to meet Building Code requirements. The maximum service temperature for the faced surface is 70 degrees Celsius.

Supplied in roll or sheet form to allow for greater design flexibility in HVAC and commercial building applications.

Glasswool 24kg

Glasswool Insulation has the high resiliency of a board, while retaining enough flexibility to be used in roll form.

Plain Foil Facing (LD, MD and HD)

Our range of light, medium and heavy-duty facing foils are double-sided aluminium and feature different levels of product strength reflected in their duty classification.

FlexiCell NBR Insulation – Nitrile Black Rubber Rolls

FlexiCell NBR Roll (formerly known as PlumbaFlex) is flexible light-weight nitrile black rubber suitable for energy-saving and effective thermal insulation. Widely used for hot water, air conditioning, refrigeration and chilled water insulation applications. The product is compliant with Australian Standardsand is FM Approved.

FlexiCell NBR – Nitrile Black Rubber Pipe

FlexiCell NBR is flexible light-weight nitrile black rubber suitable for thermal insulation. The product is 2 metres in length and compliant with Australian Standards and is FM Approved. Working temperature from -50ºC to 105ºC.

Glasswool Ductwrap

Glasswool Ductwrap is a lightweight, flexible insulation blanket designed for external lagging of sheet metal ductwork as well as low to medium temperature industrial equipment and appliances.

Glasswool 48kg

Featuring high compressive strength and clean, accurate fabrication, this high density Glasswool material has excellent thermal and acoustic properties.

FlexiCell (PE) Pipe Insulation

FlexiCell Pipe Insulation is made from cross-linked closed cell 25kg/m3 polyethylene foam with a durable foil facing and achieves negligible water vapour permeance.

These sections are manufactured from cross-linked closed cell polyethylene foam with a durable foil facing suitable for operating temperatures up to 105oC. The 2m lengths have a slit along the entire length for easy installation and are easily cut with a sharp knife. The installation is completed by sealing joins with a reinforced foil tape (plain foil tape not recommended).

FlexiCell (PE) Insulation Rolls

FlexiCell Pipe Insulation is made from cross-linked closed cell 25kg/m3 polyethylene foam. Available with or without a durable foil facing and with either a non-stick or self-stick backing. Non-stick is suitable for operating temperatures up to 105˚C and self-stick operating temperature is 70˚C.

Superwool Plus Blanket

Superwool Plus Blanket is a durable, easy to handle insulation material made from long superwool fibres. With excellent thermal stability and fire protection qualities, the product retains its original soft fibrous structure up to a continuous operating temperature of 1000ºC.

Baron FireBLOCK

Baron FireBLOCK is manufactured from a robust, resilient Rockwool insulation material encapsulated in a soft, 50-micron malleable aluminium foil with joins in the foil; to seal, use a self-adhesive aluminium foil tape.

FyreWrap

Fire rated duct wrap materials are a lightweight alternative to fire spray used to provide 1 or 2 hour fire rated protection for ductwork in commercial buildings. Common uses include smoke exhaust ducts, kitchen exhaust ducts, supply air ducts for zone pressurisation systems and chemical fume ducts. Products are fire tested in accordance with AS 1530.4.

Foil Faced Baron Rockwool Pipe

Foil Faced Rockwool Pipe Section is continuous through the wall/floor and extends both sides. Tested by the Thermal Insulation Contractors Association Australia and accredited by BRANZ (Report FP10422) in accordance with AS1530.4 –2014, AS4072 and the NCC building code requirements for FRL -/ 120 / 120 in both horizontal and vertical penetrations.

External Clad

The External Clad system is a zero permeability, absolute vapour barrier for insulation cladding and jacketing applications, designed for insulation protection.

Aluminium Foil (50um)

Aluminium foil – a “dead soft” 50 micron plain aluminium foil often used instead of a building foil for higher temperature applications.

AFT (Aluminium Foil Trilaminate)

AFT – Aluminium Foil Trilaminate (Vapastop 883) is a lightweight, fully sealed continuous acoustic membrane (CAM) suitable as an internal liner for ductwork. It is ideal for applications where a vapor barrier is required combined with superior indoor air quality performance by minimising the risk of fibres entering the duct’s air stream, whilst also maintaining an excellent acoustic (NRC) performance. AFT can sustain mechanical cleaning.

Perforated Heavy Duty (HDP) Foil Facing

A reflective foil insulation, our Perforated Heavy Duty (HDP) provides superior NRC acoustic performance values where noise minimisation is essential and where an internal vapour barrier is not required.

Tombo Rock Pipe

Tombo Rock (Rockwool) SPI (Sectional Pipe Insulation) comprises inorganic spun fibres made from natural rocks and minerals bonded by organic binder.

DuctGuard

DuctGuard is a premium protection/masking film with high-level of adhesion.

Mechanical Fixings

For metal fastening choose from these popular metal fixings: Hex Head Self Drilling Screws, Pan Head (Zinc Plated) Self Tapping Screw, Drive Anchor, Dome Head Rivet, and Double Ended Panel Drill High Speed Steel (HSS) material with Titanium Nitride coating.

Weld Pin Guns and Strapping

Choose from a selection of reliable products including: HBS Pegasar 500 Accu Stud Weld Gun, SureShot II Accessories, Blue Plastic Strapping and galvanised Steel Strapping.

Fixing Pins and Clips

Baron stocks a variety of HVAC Insulation pins and clips to use when installing both fibreglass duct board insulation and fibreglass duct wrap.

Flange Tape

PE Foam Tape (Self-Wound Flange Tape) has a uniform closed cell structure with a smooth surface that gives an excellent seal against water and vapour transmission when compressed 10 – 30% of its original thickness.

External Clad Tape

Use this 3-ply adhesive-backed tape with the External Clad system. Offers zero permeability.

Durasorb Tape

Baron Durasorb Tape is a black self-adhesive tape with release paper that matches Baron Durasorb facing insulation products, which is spunbonded 100% non-woven polyester with an embossed pattern.

Plain Foil Tape

Use plain foil tape to seal overlaps and joins in insulation material. Baron Insulation Aluminium Foil tapes have a pressure sensitive adhesive, so, they must be applied using pressure. The more you pressure apply, the more surface contact is achieved, and the better the bond.

Reinforced Foil Tape

Reinforced Aluminium Foil Tape is a flexible aluminium foil, laminated with a polyethylene mesh and coated with a high strength, solvent-based aggressive acrylic adhesive and protected by an easy peel release liner.

Tombo Rock Roll and Board

Rockwool is non-combustible material, suitable for thermal insulation, fire protection, and sound absorption/noise reduction.

Tombo Rockwool is an economical insulation material which can be used in applications where high temperatures are involved. The Tombo Rockwool range has a maximum service temperature of 650 degrees Celsius and all blanket material is supplied with a foil facing which enhances flexibility, handling characteristics and strength.

Scrim faced Tombo Rockwool is also available on request.